JETMAN

JETMAN

Wednesday 25 April 2012

CFD study of PAK - FA

CFD study of  PAK - FA






9 comments:

  1. Hello Sanjay! I'm Paul Podesta. I sent you a message on GrabCAD to ask you what fluidic effects you had modelled on my plane. Looks great, I just wanted to know what you had tested on it. I noticed for example, that there is a notch/hole at the top of the left wing, that definitely was not there when I made it. Did you add that?

    ReplyDelete
  2. Mr.Paul Podesta thanks for showing interest on my simulation. I have plotted the pressure distribution on the surface of the aircraft. I am not sure how far the results are correct. About the notch, i didnt create it. It has resulted as a result of poor mesh quality. I am a beginner in CFD. I have used STARCCM+ CFD code. If you still want to know more please fell free to ask questions.

    regards
    Sanjay.K

    ReplyDelete
  3. OK, the pressure distribution for what airspeed? And what elements did you use?

    ReplyDelete
  4. I think for 305 m/s air speed. I have used thin mesh, compressible flow, K-epsilon turbulence model, segregated flow, turbulent flow, stationary.etc as physics for the simulation

    ReplyDelete
  5. Mr.Paul I would like to learn surface modelling of aircraft's. Any tutorial materials plz share.

    ReplyDelete
  6. Hmmm that depends. What software do you use? I use CATIA for surface modelling

    ReplyDelete
  7. I use CATIA V5, but I just know the basics.

    ReplyDelete
  8. I tried twice to put up a rather long post to give you a few pointers for surfacing in CATIA, but for some reason it says it has posted, then I check on another computer and it's not there. Is there a word limit for blog posts?

    ReplyDelete
  9. I saw the post It was there before with a video link but now it has vanished. !!0!!

    ReplyDelete